Heat Detector Malaysia

Indoor fires can be very destructive and have a greater odd of causing deaths than outdoor fires. We shall, therefore, expound more on fire detection equipped that best suits indoor environments to prevent the burning of property and loss of life. This comes in the form fire or heat detector devices in Malaysia.


Heat Detector as part of Fire Safety Plansheat detector malaysia

Heat detectors are devices that are used as fire alarms. They are made in a way that allows them to respond when heat moving in the atmosphere increases the temperature levels of heat sensitive elements.

The conductivity of such elements regulates the flow of heat. These devices function by either:

1. Picking up temperature rises of certain ranges
If the temperature of certain elements or environments stay constant for a considerate period and then rise to a significant range (commonly set at 12 degrees centigrade), they sense the change and respond. The initial response is always to offset an alarm. Other responses are often preferences of different entities depending on the installation of fire systems.

2. Noting the breakage of certain temperature limits
Different environments have threshold temperatures. If these thresholds are exceeded, undesired and detrimental consequences occur. Some heat furnaces and industrial machinery can take up more heat than others. Fixed temperature heat detectors can also regulate environmental temperatures.


heat detector malaysiaFire Detector

These are intended to perceive and respond to the incidence of a fire. These detectors are frequently confused with heat detector and smoke detectors but have the capacity to respond to fires much faster.

They have more sophisticated mechanisms than heat and smoke detectors. The responses they effect when they detect fires vary depending on the setup preferences.

Some of the options available for fire detectors, also called flame detectors, include sounding alarms to alert the occupants of a building, deactivating fuel and gas lines and setting off firefighting mechanisms. Industrial experts sometimes use flame detectors, not to monitor outbreaks of fire, but to determine if their industrial furnaces have enough fire.


Some of the various assorted flame detecting mechanisms that our wide range of fire detectors include:

• Ultraviolet sensors
• Infrared array flame detectors( also called visual flame sensors)
• Infrared fire sensors
• Infrared thermal cameras
• Thermocouple flame detection

These fire fighting devices should be able to detect all fires that plague your premises approximately at the very moment of ignition. They serve to prevent loss of life than any other properties.


Fire Safety for Homes and Commercial Areas in Malaysia

Infernos cause loss of life and property. The causative agents of loss in fires are smoke and heat. While both can kill you and the people in your premises, more people die due to suffocation by smoke than heat. Destruction of property, however, results from heat and not smoke. Smoke only reduces the sensitivity of a few electric gadgets and makes fabrics smell awful.

Smoke is always an indicator of fires. However, smoke detectors prove to be irrelevant for the protection of certain machinery because the machinery is used in smoky environments. Smoke doesn’t always mean a lot of heat.

We, therefore, advise that private homes always be installed with fire detectors. We recommend supplementing it with a smoke detector. For industrial premises, however, we advise that you have the best smoke, heat and fire detecting devices set in multiple strategic places. They require comprehensive fire alarms and suppression systems to protect both men and machinery from possible infernos.

Contact Us Now To Get A Quote